Video
Following are regular Air Conditioner Fin Die Sizes for reference.
Φ9.52×36R×4P
(1)This kind of die is suitable for the forced-air cooling refrigerator.
(2)This kind dies normally can make several similar parts in one die.
(3)Using Swedish or Japanese steel,punch and die use ASP30 or HAP40.
(4)Fin die manipulation is very convenient,excellent interchangeability of components.
(5)Adopting Misumi standard components(including guide post,bushing,spring,screw etc)which made in Japan.
(6)Stroke time reach to 200-250 times per minute.
Φ9.52×36R×2P
(1)This kind of die is suitable for the forced-air cooling refrigerator.
(2)This kind dies normally can make several similar parts in one die.
(3)Using Swedish or Japanese steel,punch and die use ASP30 or HAP40.
(4)Fin die manipulation is very convenient,excellent interchangeability of components.
(5)Adopting Misumi standard components(including guide post,bushing,spring,screw etc)which made in Japan.
(6)Stroke time reach to 200-250 times per minute.
Φ7×48R×4P
(1)This kind of die is suitable for the forced-air cooling refrigerator.
(2)This kind dies normally can make several similar parts in one die.
(3)Using Swedish or Japanese steel,punch and die use ASP30 or HAP40.
(4)Fin die manipulation is very convenient,excellent interchangeability of components.
(5)Adopting Misumi standard components(including guide post,bushing,spring,screw etc)which made in Japan.
(6)Stroke time reach to 200-250 times per minute.
Φ7×42R×2P
This kind of die is suitable for the home use air conditioning, central air conditioning, humidity reducing set and so on.
The die can be used in different type and thickness of aluminum foil.(When use 0.095 aluminum foil,3/8 die can reach to 3.0mm high and 7mm die can reach to 2.2mm high.
Using Swedish or Japanese steel,punch and die use ASP30 or HAP40.
Fin die manipulation is very convenient,excellent interchangeability of components.
Adopting Misumi standard components(including guide post,bushing,spring,screw etc)which made in Japan.
Stroke time reaches to 250-330 times per minute.
φ7×36R×2P
This kind of die is suitable for the home use air conditioning, central air conditioning, humidity reducing set and so on.
The die can be used in different type and thickness of aluminum foil.(When use 0.095 aluminum foil,3/8 die can reach to 3.0mm high and 7mm die can reach to 2.2mm high.
Using Swedish or Japanese steel,punch and die use ASP30 or HAP40.
Fin die manipulation is very convenient,excellent interchangeability of components.
Adopting Misumi standard components(including guide post,bushing,spring,screw etc)which made in Japan.
Stroke time reaches to 250-330 times per minute.
Φ7×26R×2P
This kind of die is suitable for the home use air conditioning, central air conditioning, humidity reducing set and so on.
The die can be used in different type and thickness of aluminum foil.(When use 0.095 aluminum foil,3/8 die can reach to 3.0mm high and 7mm die can reach to 2.2mm high.
Using Swedish or Japanese steel,punch and die use ASP30 or HAP40.
Fin die manipulation is very convenient,excellent interchangeability of components.
Adopting Misumi standard components(including guide post,bushing,spring,screw etc)which made in Japan.
Stroke time reaches to 250-330 times per minute.
Φ7×24R×2P
This kind of die is suitable for the home use air conditioning, central air conditioning, humidity reducing set and so on.
The die can be used in different type and thickness of aluminum foil.(When use 0.095 aluminum foil,3/8 die can reach to 3.0mm high and 7mm die can reach to 2.2mm high.
Using Swedish or Japanese steel,punch and die use ASP30 or HAP40.
Fin die manipulation is very convenient,excellent interchangeability of components.
Adopting Misumi standard components(including guide post,bushing,spring,screw etc)which made in Japan.
Stroke time reaches to 250-330 times per minute.
